An Investigation of the Reinforcing Effect of Stone Columns in Soft Clay
A proposed major extension to an iron ore handling yard was located in an area underlain by soft alluvial clay. Stone columns were proposed to limit settlement of rails supporting the...

The Usefulness of Stone Columns to Reduce Settlements and Distortions - A Case History
A shed had to be built as a storage area for ashes and gypsum resulting from the combustion of coal in a power plant in Sardinia, Italy. Two field loading tests have been performed. In...

Finite Strain Consolidation for Vertical Drains
Consolidation equations for vertical prefabricated drains which consider finite vertical strain of the soil are derived. Estimated consolidation times are shorter when finite soil strain...

A Procedure for Predicting Seismic Deformation of Earth Structures
This paper presents an analysis procedure for predicting the earthquake induced displacements of earth structures. The procedure is an extension of the simple Newmark method from a single-degree-of-freedom...

The Role of Shale Pores in Settlement
Waste fills resulting from the mining of coal in Appalachia should ideally consist of large, free-draining sedimentary rock fragments. The successful performance of these embankments is...

Deformations About Excavations in Highly Stressed Rock
The central business district of Sydney, New South Wales (NSW), is dominated by the Hawkesbury Sandstone, a Triassic sedimentary formation. Measurements have confirmed the existence of...

Case History of a Collapsible Soil Fill
Collapse settlement of a deep compacted fill led to damage of a group of condominium units. The fill consisted of a highly heterogeneous mixture of coarse- to fine-grained soil containing...

Movement of Foundations on Rock
This paper reviews methods for estimating the settlement of vertically loaded foundations on rock, with particular emphasis on shallow and piled foundations in and on soft rock....

Pressure-Time Flow Rate in Low Head Hydro Plants
Very few methods are accepted for measuring the flow in the large intakes typical of low head, run-of-the-river hydro plants. These intakes are characteristically short, non-uniform, non-prismatic,...

Non-Intrusive Experimental Setup for Inflatable Dam Models
A method which allows for a non-intrusive evaluation of the dynamic response of the inflatable dams under overflow and impounding water conditions is presented. The internal pressure variations...

On the Erodibility of Rock and Other Earth Materials
An outline of a new method to determine the erodibility of rock and other earth and engineered earth material is presented. The method quantifies the relative capacity of the boundary...

Influence of a Sand Layer on Headcut Advance
The presence of an erodible material layer in the soil profile has been observed to influence headcut movement in earth emergency spillways. Large-scale flume tests were conducted to examine...

Sandstone Materials Used as Riprap
A study was conducted to determine if sandstone materials could be potentially used as riprap. Nineteen rock samples (16 sandstone samples) were collected in six western states. The rock...

A Lagrangian Model for Surface Buoyant Jets
A model is developed to predict the trajectory of a surface buoyant discharge into a large receiving water body. A Lagrangian approach is used to trace the path of a `control volume' of...

Thresholds for Gravel and Cobble Motion
Flows necessary to initiate motion of rocks on a lateral bar along the Gunnison River in Black Canyon of the Gunnison National Monument are observed. Gravel and cobbles are painted and...

Plunge-Pool Scour by Inclined Jets
A series of experiments were performed in a sand-bed plunge pool with circular jets produced by nozzles at different angles and elevations and conveying different flow discharges. The...

Computer-Integrated Construction
Computers have been used quite successfully as replacements for manual drafting, but to stop there seriously underuses the potential of computer aided design. By using the computer's...

Fracture Mechanics Applied to Geotechnical Engineering
This proceedings, Fracture Mechanics Applied to Geotechnical Engineering, contains theoretical and experimental studies related to the formation,...

Water on Stone
Schal Bovis, a Chicago construction-services firm, has shown that Japan is not entirely a closed market. With more than a dozen major Japanese projects under its belt, it has broken through...

Design of Shotcrete Support from the Rock Mechanical Viewpoint
When designing tunnel support the key question is to determine the loading conditions resulting from the deformation of the rock mass during and after excavation. Principle views are given...

 

 

 

 

Return to search